Skip to content
Mon–Fri 10:30 am – 7:00 pm · Kuala Lumpur WhatsApp +60 12-234 5097
Buy saffron
Business & Wholesale

How to Read a Saffron Lab Report Before a Bulk Order (ISO 3632)

Baca dalam Bahasa Melayu

Short answer: A saffron lab report under ISO 3632 shows four key numbers: crocin (colour), picrocrocin (taste), safranal (aroma) and moisture. For the top category, Category I, crocin should be at least 200 and picrocrocin at least 70, safranal should sit between 20 and 50, and moisture in threads should be no more than 12%. Before a bulk order, check these numbers, and check that the report belongs to the batch you are buying.

When you order saffron by the kilo, you cannot judge every thread by eye. A lab report turns quality into numbers you can compare. This guide explains each number in plain words, uses our own report as a worked example, and lists what to check before you pay.

What is ISO 3632?

ISO 3632 is the international standard for saffron. It sets quality limits and the lab methods used to test them. Wikipedia’s saffron article explains that the standard sorts saffron into three categories, from Category III (lowest) to Category I (finest). The category depends mainly on crocin and picrocrocin, which a lab measures with a spectrophotometer, a machine that reads how much light a saffron solution absorbs. A higher reading means more colour or taste per gram.

The same article notes that many retail packs show no ISO category at all. That is fine for a home cook buying one jar. For a business buying 500g or 1kg, a report is one of the few objective ways to compare offers.

The four numbers on a saffron lab report

1. Crocin: colouring strength

Crocin is the pigment that turns rice and desserts golden. On the report it is a reading at 440 nm, often called the “colouring strength”. This is the number most buyers look at first, because colour is what customers see on the plate. A higher crocin reading means you need less saffron for the same colour.

2. Picrocrocin: taste

Picrocrocin gives saffron its slightly bitter, typical taste. It is read at 257 nm. A low picrocrocin reading usually means a weaker flavour in the final dish.

3. Safranal: aroma

Safranal carries much of saffron’s smell. It is read at 330 nm. Unlike crocin and picrocrocin, safranal does not have a separate limit for each category. Under the standard, every category must fall between 20 and 50.

4. Moisture: how much of the weight is water

Moisture is shown as a percentage of the weight. In bulk buying it matters directly to cost. At 12% moisture, about 120g of every kilo is water. At 6% moisture, it is about 60g. You pay the same price per kilo either way, so lower moisture means more saffron for your money.

ISO 3632 limits at a glance

The table below uses the limits in the 2011 edition of ISO 3632-1, as summarised on the iTeh standards catalogue. That edition has since been withdrawn and replaced by a newer one, so check which edition your lab used.

TestCategory ICategory IICategory III
Crocin (colour, 440 nm)200 or more170 or more120 or more
Picrocrocin (taste, 257 nm)70 or more55 or more40 or more
Safranal (aroma, 330 nm)20 to 5020 to 5020 to 50
Moisture (threads)12% or less12% or less12% or less

The standard also has limits for extraneous matter, foreign matter and ash, and it requires that no artificial colouring is present. A full category result depends on all of these tests, not only the four numbers above.

A worked example: our own saffron lab report

Here are the figures from our report (FAM lab, Mashhad) for our Super Negin saffron, compared with the Category I limits:

  • Crocin 263: above the Category I minimum of 200.
  • Picrocrocin 88: above the Category I minimum of 70.
  • Safranal 20: inside the required range of 20 to 50.
  • Moisture 6.2%: well under the 12% limit for threads.

Read a supplier’s report the same way: put each number next to the limit and see where it falls. A crocin reading that is just at the minimum and one that is well above it are both “Category I”, but they do not colour food the same way.

What to check on a report before a bulk order

  1. The lab name and date. You should be able to see who tested the saffron and when.
  2. The batch or sample reference. The report should match the saffron you will receive, not a different lot.
  3. The standard and edition. Look for ISO 3632 and the edition the lab followed.
  4. All four numbers. A report that shows only crocin leaves out taste, aroma and moisture.
  5. The form tested. Threads and powder have different moisture limits (12% for threads, 10% for powder), so the report should say which was tested.
  6. A match with what you see. Numbers should fit the look of the threads. Lots of yellow style with a very high crocin claim deserves a question. Our article on yellow parts in saffron threads explains why.

For the full buying process, see our 10-point checklist for buying saffron in bulk, and our guide to saffron grades for how grade names relate to quality.

Common mistakes

  • Looking at crocin only. Colour matters, but taste, aroma and moisture are part of quality too.
  • Accepting an old or unrelated report. Ask which batch it covers.
  • Ignoring moisture. High moisture means you pay for water.
  • Treating “ISO” on a label as a result. The report, with its numbers, is what counts.
  • Trusting a report alone. Photos or videos of the actual saffron are still worth asking for. Our list of warning signs in cheap bulk offers covers the other checks.

Frequently asked questions

What is a good crocin number for saffron?

Under the 2011 limits, 200 or more puts saffron in Category I for colour. The higher the reading, the stronger the colour per gram.

Is a safranal reading of 20 low?

The standard asks for safranal between 20 and 50 in every category, so 20 is inside the required range.

Can I check your saffron before ordering wholesale?

Yes. Our lab figures are listed above, and on WhatsApp we send photos and videos of the saffron so you can see it first. We do not give free samples.

How much does wholesale saffron cost?

Current prices are on our wholesale saffron page, from 50g (RM745.90) up to 1kg (RM7,500). New to the market? Start with our guide to saffron in Malaysia.

Planning a bulk order and want to see the numbers first? Message our wholesale team on WhatsApp at +60 12-234 5097 with your business type, the amount you need and any questions about our lab figures.

Buy on ShopeeOrder on WhatsApp

Buying guide: saffron in Malaysia – prices, where to buy and how to choose.

WhatsApp us